The T8 Dimmable LED Tubes are the same version of the LED tubes but with the possibility to regulate the light intensity. For T8 LED Tubes, it is necessary to get off the starter and ballast of the fluorescent tubes and connect directly to 220 VAC. They are available in measures of 600 mm, 900 mm, and 1200 mm in length and in 3000-3500k,4000-4500k,6000-6500k. The dimmable led tubes are often used in homes, offices, factories, markets as a commercial lighting fixture
——–What is the difference between Dimmable LED Tubes and 0-10v Dimmer?
Reply: Both of them are dim the brightness; The Dimmable Tubes is to change the output voltage by resistors to realize the dimmable effects; 0-10v dim is to get the effects by 0-10v changes. 0-10v is more exact.
——–What is the segmented dimming tue light?
Reply: segmented dimming to change tube colors. while warm white led is lighten up, the led tubes will be warm white; while nature white led is lighten up, the linear tubes will be nature white. normally it is double color led lighting fixuture.
The Infrared Sensor LED T8 Tubes principle is this way: When a car or human is detected (by the infrared sensor on the LED tube) moving in the direction of the /parking lot, the LED Linear tube will be turned on automatically with full brightness. After 10 to 30 seconds of delay (it can be adjusted), it will be turned down to 10%~30% brightness automatically. When there’s no human or car detected, the Infrared Sensor LED T8 Tube Light fixture will give off a low amount of light with a power consumption of only 3 watts, which is enough for on-site monitoring. During busier hours, the tube remains at full brightness.
——–What is the difference between Infrared Sensor LED Tubes and Radar sensor led tubes?
Reply: The sensor principles are different. The Infrared sensor LED T8 tubes are to control lighting fixtures by a focus on the human body infrared radiation to the sensor module, and radar sensor tubes are to emit microwaves to detect objects. on distance, the radar sensor distance will be longer than the infrared sensor.
——–Are Infrared sensor T5 LED Tubes availale ?
Reply: Currenlty T5 LED Tubes only can be made as radar sensor tube light
T8 LED tubes are widely applied in commercial lighting and home lighting and can be used in both indirect and parabolic light fixtures. They work well in areas that implement climate control and have standard heights for the ceiling, including storage areas, mechanic garages, and fabrication floors. The T8 LED Tube Lights are a replacement for T8 fluorescent tubes. This T8 LED Tube is designed by double 2835 LEDs than regular ones. higher brightness for large areas