Project Description
Power Supply 80W
Constant voltage Power Supply 80W is Waterproof IP67 LED Power Supply . It could be used for indoor and outdoor constant voltage LED Lighting. LED power supply is very important to the lifespan of LED lighting. High quality LED driver always could prolong the working life of the led lighting and your project.
– Compact size, easy for installation
– High transfer efficiency
– Wide input range
– Stable constant voltage output
– IP67, both indoor & outdoor use suitable
– 100% full loading, 100% burn-in tested
– Overload/short circuit protection
| Part NO | SR-WP-80W-12V | |
|---|---|---|
| Rated DC voltage | 12V | |
| Rated current | 6.66A | |
| Current range | 0~6.66A | |
| Rated Power | 80W | |
| Voltage tolerance | 12±0.5V | |
| Ripple & Noise | <100mVp-p | |
| Load regulation | ±1% | |
| Setup, Rise time | 1500ms/230VAC | |
| Hold up time | 1500ms/230VAC | |
| Voltage range: | 170~250VAC; |
|---|---|
| Frequency range: | 50~60Hz |
| Efficiency (Typ.): | >86% |
| Leakage current: | 5mA/230VAC |
| Over Current: | Yes, active when loading is over 110~120% Output Voltage drops if overloaded |
| Short circuit: | Yes, hiccup mode, recovers automatically after fault condition is removed |
| Working TEMP.: | -25℃~50℃ |
| Storage TEMP. | -40℃~80℃ |
| Working Humidity: | 20~905% RH non condensing, refer to IP67 |
| Vibration: | 10~500Hz,2G 10min/1cycle,period for 60min,each along X,Y,Z axes |
| TEMP. coefficient | ±0.03%/℃(0~50℃) |
| Safety Standards: | EN 61347-2-13 |
| Withstand Voltage: | I/P-O/P: 3750VAC/1min/<5mA |
| Isolation Resistance: | I/P-O/P: >100M Ohms / 500VDC /25°C / 70%RH |
| EMC: | EN55015:2006/A2:2009,EN61000-3-2:2006/A2:2009,EN61000-3-3:2 |
| MTBF: | 50KHours 25℃ |
| Dimension: | 215*52*35mm(L*W*H) |
| Weight: | 0.85Kg,20pcs/16Kg |
| Warranty: | 2 years |
Dimension:
