Project Description
Waterproof led driver
Waterproof LED Driver 150w is a type of constant voltage led power supply. It could be used for indoor and outdoor constant voltage LED Lighting. DC12V, IP67 .Waterproof LED power supply is very important to the lifespan of LED lighting. High quality LED Power Supply always could prolong the working life of the led lighting and your project.
Waterproof LED Driver 150watt
– Compact size, easy for installation
– High transfer efficiency
– Wide input range
– Stable constant voltage output
– IP67, both indoor & outdoor use suitable
– 100% full loading, 100% burn-in tested
– Overload/short circuit protection
Part NO | SR-WP-150W-12V | SR-WP-150W-24V |
---|---|---|
Rated DC voltage | 12V | 24V |
Rated current | 12.5A | 6.25A |
Current range | 0~12.5A | 0~6.25A |
Rated Power | 150W | 150W |
Voltage tolerance | 12±0.5V | 24±0.5V |
Ripple & Noise | <100mVp-p | |
Load regulation | ±1% | |
Setup, Rise time | 1500ms/230VAC | |
Hold up time | 1200ms/230VAC |
Voltage range: | 100~250VAC; |
---|---|
Frequency range: | 50~60Hz |
Efficiency (Typ.): | >87% |
Leakage current: | 3mA/230VAC |
OverLoad: | Yes, cut-off mode, output shuts down if over-loaded |
Short circuit: | Yes, hiccup mode, recovers automatically after fault condition is removed |
Working TEMP.: | -30℃~50℃ |
Storage TEMP. | -40℃~80℃ |
Working Humidity: | 20~95% RH non condensing, refer to IP67 |
Safety Standards: | EN 61347-2-13 |
Withstand Voltage: | I/P-O/P: 3750VAC/1min/<5mA |
Isolation Resistance: | I/P-O/P: >100M Ohms / 500VDC /25°C / 70%RH |
Dimension: | 242*71*45mm(L*W*H) |
Weight: | 1.20Kg,10pcs/13Kg/ctn |
Warranty: | 2 years |